Precio $750
Caracteristicas:
DIVISOR ELECTRONICO DE 2 O 3 VIAS ESTEREO O 4 MONO, LINKWITZ RILEY DE 24dB/OCT; FILTRO PASA ALTOS DE 40Hz; AJUSTES DE GANANCIA DE ENTRADA, FRECUENCIA, X1/X10; GANANCIAS DE SALIDA Y CONMUTADOR DE FASES POR CANAL; MODO MONO/ESTEREO Y MONO SUM. CONECTORES XLR. 1 UNIDAD DE RACK
INPUT
Connectors: XLR
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced >50k ohm, unbalanced >25k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >50dB at 1kHz
OUTPUT
Connectors: XLR Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 200 ohm, unbalanced 100 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k or greater
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: <> 90 kHz, +0/-3 dB
Signal-to-Noise: Ref: +4 dBu, 22 kHz measurement bandwidth
Stereo Mode >94dB (Low Output)>93dB (Mid Output)>92dB (High Output)
Mono Mode: >94dB (Low Output)>94dB (Low/Mid Output)>92dB (High-Mid Output)>92dB (High Output)
Dynamic Range: > 114 dB, unweighted, any output
THD + Noise: < 0.004% at +4 dBu, 1 kHz< 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz
CROSSOVER FREQUENCIES
Stereo Mode:Low/High 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Stereo Mode:Mid/High: 450 Hz to 9.6 kHz
Mono Mode: Low/Low Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Low-Mid/High-Mid: 450 Hz to 9.6 kHz
High-Mid/High: 450 Hz to 9.6 kHz
Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
FUNCTION SWITCH
Front Panel (Low Cut): Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
Phase Invert: Inverts the phase at the output, one switch per output
Rear Panel:x1 / x10:Multiplies the low-mid (mono: low/low-mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel
Mode: Selects stereo 2-way, 3-way or mono 4-way operation and disables all LEDs for controls that are non-functional in the mono mode
LF sum: Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode
INDICATOR
Stereo Operation: Green LED
Mono Operation: Yellow LED
Low Cut: Red LED per channel
x10 Green LED per channel
Phase Invert: Red LED per output (3 per channel)
POWER SUPPLY
Operating Voltage: 100-120 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50 Hz
Power consumption: 15W
Main Connection: IEC 320 receptacle
PHYSICAL
Dimensions: 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Weight: 4.0 lbs. (1.8 kg)
Shipping Weight: 5.8 lbs. (2.6 kg)
